SMO-P26/CATV Optical Receiver Module

SMO-P25 CATV Optical Receiver Module is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.

SMO-P27 CATV Optical Receiver is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.

SMO-P28 CATV Optical Receiver is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0d.

SMO-P29 CATV Optical Receiver is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.

Mini V-ONU F01.pdf 1. SCOPE This document describes basic electrical characteristics and mechanical characteristics of optical receiver FTTH-F01, which is produced in Shenzhen, PRC.  2. ELECTRICAL SEPCIFICATION 2.1 INPUTRANGE 2.1.1 OPTICAL INPUTRANGE Optical receiver FTTH-F01 should operate within specification of optical input range from -15dBm to -5dBm. 2.1.2 DC INPUTRANGE Optical receiver FTTH-F01 should operate within specification of DC input range from 4.8V to 5.2V.  2.2 OUTPUT LEVEL The optical receiver should operate within specification of output level from 70dBµV to 73dBµV with optical input range is from -15dBm to -5dBm.  2.3 ESD SENSITIVITY The optical receiver should operate within specification of ESD sensitivity according to the table below: ESD ESD sensitivity Human body model; R=1.5KΩ;C=100pF MAX=500 1 V 2.4 RF PERFORMANCE REQUIRMENT 2.4.1 BANDWIDTH The optical receiver should operate within specification of band width from 47MHz to 1000MHz 2.4.2 OUTPUT RETURNLOSS The exact output return loss should apply the specification that S22 ≦-14dB 2.4.3 DISTORTION REQUIREMENT The optical receiver should operate within specification of distortion requirement according to the table below: Composite Triple Beat dB - - -58 60 channels; Measured at 543.25MHz Optical power@- 10dBm Composite Second Order distortion dB - - -58 Noise carrier rating dB 43 - - 2.5 OPTICAL PERFORMANCE SPECIFICATION See the table below: Parameter λ1 1530 1550 1570 nm Optical Wavelength Range R 0.90 0.95 - A/W Op=0dBm ， λ=1550nm Responsivity Id - 0.3 0.5 nA Dark Current IL - - 0.7 dB Insert Loss ORL - - - dB Return loss - 45 - λ=1550nm λ=1550nm Optical Connector - SC - Green Green 3. ENVIRONMENTAL SPECIFICATION 3.1 TEMPERATURE The temperature include storage temperature and operating temperature, and the optical receiver should apply to the temperature specification as the table below 3.1.1 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Unit Min Typ Max Note Optical Input Power Pin dBm - - +2.0 Levels above max range may result in (latent) damages to the machine Storage Temperature T-storage ºC -40 - +85 10 ... 95 % relative humidity; non-condensing 3.1.2 OPERATING ENVIRONMENTAL LIMITS Parameter Symbol Unit Min Typ Max Note Case Temperature T-case ºC 0 - +80 10 ... 80 % relative humidity; non-condensing Power Supply Voltage VPSU V 4.8 5.0 5.2 Power Consumption PPSU W - 0.6 1 VB=5V FTTH-F01 RF SPECIFICATIONS: Parameter Symbol Unit Min Typ Max Note RF passband FPB MHz - 75 - Minimum BW; RF output impedance Rimp_out Ω - - - AGC working range for optical input power Rimp_out dBm -15 - -5 Optical AGC will be implemented,the average optical input power controls the gain. RF output level RFout dBµV 70 72 73 Optical power input range in --5dBm~-15dBm Flatness Flatness dB - ±1 47~1000MHz Output Return Loss ORL dB - - -14 Modulation Error Ratio MER dB 33 - -  - Total 96channels input ,OMI=3.5%,Optical power@-15dBm Bit Error Ratio BER dB 1e-8 CNR CNR dB 43 60 channels; Measured at 543.25MHz Optical power@-10dBm CSO CSO dBc - - -58 CTB CTB dBc - - -58 Total current consumption(DC) Itot mA 130 - 170 VB=5V If you want to know more our product details,Please reply to get E-Catelog and FOC samples,Thank you.

SDU-RFoG-F01.PDF Product Description： The SDU RFoG F series is mainly used for RFoG network. “OBI-Free” R-ONU eliminate the Optical Beat Interferences(OBI) that has been an issue in the traditional RFoG deployments. Its return path laser can work in burst mode.The upstream output optical wavelength can be set as CWDM standard wavelength to shield the OBI effectively.   Features： 1) Support downstream optical AGC, The control range is -6~+2dBm; 2) Burst mode is supported； 3) OBI-Free technology on this model supports up to 16 R-ONUs transmitting into a single optical input; 4) 0.2nm as one step, and the automatic control of transmitting wavelength can be reached by the temperature change randomly.

Download product specification:SMOP23.PDF FEATURES ● Excellent linearity  ● Extremely low noise  ● Excellent flatness  ● Rugged construction  ● PWDM ● AGC DESCRIPTION SMOP23 CATV AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry make output level stably when in the range of -10~0dBm. Small size which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb＝25℃, VB＝5V,ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS responsively V/W 0.9 - - λ=1550nm Flatness of frequency response dB - ±1.0 ±0.5 f=45 to 1000 MHZ, wide band flatness Flatness of frequency dB - - ±0.4 Narrow bandwidth per 7MHz Slope dB 0 2.0 4.0 From 45~1000MHz Output Return Loss dB -14 - - f=45 to 1000 MHZ Total Current Consumption mA 310 - 350 VB=5V Automatic Gain Control Receiving Power: -10~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 78 81 83 Popt= -10~0dBm @176.25MHz 42 channels T=25℃ OMI=4% per channel Vo1 Output Voltage dBuV 77 80 82 Popt= -10~0dBm @176.25MHz 42 channels T=-20℃ OMI=4% per channel CTB Composite Triple Beat dB - - -60 Optical power/ 0dBm 42chanels PAL-D.175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CTB Composite Triple Beat dB - - -62 Optical power- 1dBm 42channels PAL-D.175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CNR Noise carrier rating dB 46 - - Optical power/- 8dBm 42channels PAL-D.176.25MHz OMI=4% per channel If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

SMO-P28 CATV Optical Receiver is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0d.