SMO-P15/CATV AGC Optical Receiver Module

Download product specification：HP80A-8.PDF  FEATURES ● Excellent linearity ● Extremely low noise ● Excellent flatness ● Standard CATV outline ● Rugged construction ● FC/APC SC/APC ● AGC   DESCRIPTION The HP80A-8AGC CATV Optical Receiver Module has an FC/APC or SC/APC Connector. The amplifier supply voltage pin Connect to 5V(DC) . The modules have a monomode optical input Suitable for 1300 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical Output having a characteristic. CHARACTERISTICS (Bandwidth 40 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively V/W 850 - ±0.75 λ=1300nm-1600nm FL Flatness of frequency response dB - - 81 f=40 to 1000 MHZ Vo Output Voltage dBuV 79 80 -63 Popt= -8 ~ +2dBm CTB Composite Triple Beat dB - - - 60 channels flat; measured at 543.25 MHz; Optical power receiving at–1dBm CSO Composite Second Order distortion dB - 50 - CNR Noise carraier rating dB - - - S22 Output Return Loss dB -12 - - f=40 to 1000 MHZ Itot Total Current Consumption dB 230 250 280 VB=5V The module normally operates at VB=5 V If you want to know more about our product details, Please reply to get E-catalog and FOC samples, thank you.

Download product specification:SMO30A.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● FC/APC SC/APC ● OP-AG   DESCRIPTION The SMO30A CATV Optical Receivers has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 5V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. optical power receiving at –7~+1dBm. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310 FL Flatness straight line dB - - - f=40 to 870 MHZ Vo Output voltage dBμV 77 - 79 85 channels flat; f=543.25MHz Optical power receiving at –7~+1dBm CTB Composite triple beat dB - - -63 85 channels flat; measured at 543.25 MHz; Optical power receiving at –7~+1dBm CSO Composite second order distortion dB - - -60 CNR Carrier to noise ratio dB - 51 - S22 Output return loss dB 12 - - Optical power receiving at -1dBm Sλ Spectral sensitivity A/W 0.85 - - f=40 to 870 MHZ A/W 0.9 - - λ=1310±20nm λ Optical wavelengh nm 1290 - 1600 Itot Total current consumption(DC) mA 5 - 20 VB1=12V mA 150 - 180 VB2=5V The module normally operates at VB=5 V(±0.1) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO33A.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● FC/APC SC/APC ● RF-AGC   DESCRIPTION  The SMO33A CATV Optical Receiver Module has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 12V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. optical power receiving at–8~+2dBm. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310nm FL Flatness straight line dB - - ±0.6 f=40 to 870 MHZ Vo Output voltage dBμV - 79 - 60~85channels flat; Optical power receiving at –8~+2dBm CTB①/② Composite triple beat dB - - -67/- 64 60 channels flat; measured at 543.25 MHz; Optical power receiving at –8~+2dBm CSO①/② Composite second order distortion dB - - -63/- 61 CNR Carrier to noise ratio dB - 50 - S22 Output return loss dB 12 - - Optical power receiving at -1 dBm Sλ Spectral sensitivity A/W 0.85 - - f=40 to 870 MHZ A/W 0.9 - - λ=1310±20nm λ Optical wavelengh nm 1290 - 1600 Itot Total Current Consumption mA 130 - 150 VB=12V ①Optical power at －8dBm；②Optical power at +2dBm 。 The module normally operates at VB=5 V(±0.1) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO105A-DDM.PDF FEATURES ● The Optical Input controlled in the range of - 8dBm to +2dBm ● Single +5V Supply ● Extremely low nois ● Bandwidth 1000MH ● Monitor the temperature of high precisio ● Can control the RF signal closing and opening ● FC/APC SC/APC   DESCRIPTION The SMO105A-DDM AGC Optical Receiver Module has an FC/APC or SC/APC Connector. The amplifier supply voltage pin Connect to 5V(DC) .The modules have a monomode optical input Suitable for 1300 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical Output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively V/W 850 - - λ=1300nm-1600nm FL Flatness of frequency response dB - ±0.75 - f=40 to 1000 MHZ Vo Output Voltage dBuV 79 80 81 Popt= -8 ~ +2dBm,f=550MHz, CTB Composite Triple Beat dB - - -62 Test at Optical input Power –1dBm.84 PAL-D channels DS22,OMI=3.5%per channel CSO Composite Second Order distortion dB - - -61 CNR Noise carraier rating dB - 50 - S22 Output Return Loss dB -12 - - f=40 to 1000 MHZ Itot Total Current Consumption mA 230 250 280 VB=5V The module normally operates at VB=5 V If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification：SMO2700.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Rugged construction ● FC/APC ● AG   DESCRIPTION SMO2700 CATV AGC Optical Receiver Module is a low power, but good performance optical receiver. Output level is 70dBuV @-5dBm. Small size with FC/APC connector which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP MAX. CONDITIONS S responsively V/W 850 - - λ=1300nm-1600nm FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 1000 MHZ, wide band flatness FL2 Flatness of frequency response dB - - ±0.4 Narrow bandwidth per 7MHz SL Slope dB - 2 3 From 45~900MHz S22 Output Return Loss dB - - - f=45 to 900 MHZ S22 Output Return Loss dB - - - f=1000 to 2700 MHZ Itot Total Current Consumption mA - - 220 VB=5V Automatic Gain Control Receiving Power: -10~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 70 - - - - Popt= -5dBm BW=45~900MHz 42 channels T=25℃ OMI=4% per channel - - - - - - Vo1 Output Voltage dBuV 68 - - - - Popt= -5dBm BW=45~900MHz 42 channels T=0~40℃ OMI=4% per channel - 80.5 - - - SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS CTB Composite Triple Beat dB - - -60 Optical power -3dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -57 CTB Composite Triple Beat dB - - -57 Optical power +1dBm 42 channels PAL-D .175.25MHz OMI=4% per channel  CSO Composite Second Order distortion dB - - -56 C- spurious Carrier to spurious dB - - -56 CNR Noise carrier rating dB 45 - - Optical power -7dBm 42 channels PAL-D .175.25MHz OMI=4% per channel - - - - Please note:  Vo1 are according to the optical change from -10dBm ~0dBm. For example, In -10dBm the output level is 80dBuV, but in the 0dBm maybe output level is 82dBuV.  Vo2 are according to the temperature change .for example: when the temperature stay 40℃,the output level will lower 0.5dB than 25℃. When the temperature stay 0℃,the output level will higher 0.5dB than 25℃. If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO-P22.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Rugged constructio ● FC/APC ● AGC&WDM function   DESCRIPTION SMO-P22 AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry inside which make output level stably when in the range of -10~0dBm. Small size with FC connector which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively A/W 0.85 λ=1550nm FL Flatness of frequency response dB ±1.0 f=47 to 1000 MHZ VO RF Output Voltage dBmV 80 81±1 83 Optical power input range in -10dBm ~ 0dBm OMI Optical modulation Index Ch% 4.0 △S Optical return loss dB 45 Optical fiber connector Typical of optical connector ( green Color) FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 1000 MHZ, wide band flatness FL2 Flatness of frequency response dB - ±0.4 Narrow bandwidth per 7MHz SL Slope dB 0 1.5 3 From 45~1000MHz S22 Output Return Loss dB -12 - - f=45 to 870 MHZ S22 Output Return Loss dB -12 - - f=871 to 1000 MHZ Automatic Gain Control Receiving Power: -8~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 80 83 Popt= -10~0dBm BW=45~1000MHz 42 channels T=25℃ OMI=4% per channe Vo2 Output Voltage dBuV 80 83.5 Popt= -10~0dBm BW=45~1000MHz 42 channels T=0~40℃ OMI=4% per channel CTB Composite Triple Beat dB - - -60 Optical power -3dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CTB Composite Triple Beat dB - - -60 Optical power -8dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 Please note:  Vo1 are according to the optical change from -8dBm ~0dBm. For example, In -8dBm the output level is 80dBuV, but in the 0dBm maybe output level is 82dBuV.  Vo2 are according to the temperature change .for example: when the temperature stay 40℃,the output level will lower 0.5dB than 25℃. When the temperature stay 0℃,the output level will higher 0.5dB than 25℃. If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMOP23.PDF FEATURES ● Excellent linearity  ● Extremely low noise  ● Excellent flatness  ● Rugged construction  ● PWDM ● AGC DESCRIPTION SMOP23 CATV AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry make output level stably when in the range of -10~0dBm. Small size which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb＝25℃, VB＝5V,ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS responsively V/W 0.9 - - λ=1550nm Flatness of frequency response dB - ±1.0 ±0.5 f=45 to 1000 MHZ, wide band flatness Flatness of frequency dB - - ±0.4 Narrow bandwidth per 7MHz Slope dB 0 2.0 4.0 From 45~1000MHz Output Return Loss dB -14 - - f=45 to 1000 MHZ Total Current Consumption mA 310 - 350 VB=5V Automatic Gain Control Receiving Power: -10~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 78 81 83 Popt= -10~0dBm @176.25MHz 42 channels T=25℃ OMI=4% per channel Vo1 Output Voltage dBuV 77 80 82 Popt= -10~0dBm @176.25MHz 42 channels T=-20℃ OMI=4% per channel CTB Composite Triple Beat dB - - -60 Optical power/ 0dBm 42chanels PAL-D.175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CTB Composite Triple Beat dB - - -62 Optical power- 1dBm 42channels PAL-D.175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CNR Noise carrier rating dB 46 - - Optical power/- 8dBm 42channels PAL-D.176.25MHz OMI=4% per channel If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Mini V-ONU F01.pdf 1. SCOPE This document describes basic electrical characteristics and mechanical characteristics of optical receiver FTTH-F01, which is produced in Shenzhen, PRC.  2. ELECTRICAL SEPCIFICATION 2.1 INPUTRANGE 2.1.1 OPTICAL INPUTRANGE Optical receiver FTTH-F01 should operate within specification of optical input range from -15dBm to -5dBm. 2.1.2 DC INPUTRANGE Optical receiver FTTH-F01 should operate within specification of DC input range from 4.8V to 5.2V.  2.2 OUTPUT LEVEL The optical receiver should operate within specification of output level from 70dBµV to 73dBµV with optical input range is from -15dBm to -5dBm.  2.3 ESD SENSITIVITY The optical receiver should operate within specification of ESD sensitivity according to the table below: ESD ESD sensitivity Human body model; R=1.5KΩ;C=100pF MAX=500 1 V 2.4 RF PERFORMANCE REQUIRMENT 2.4.1 BANDWIDTH The optical receiver should operate within specification of band width from 47MHz to 1000MHz 2.4.2 OUTPUT RETURNLOSS The exact output return loss should apply the specification that S22 ≦-14dB 2.4.3 DISTORTION REQUIREMENT The optical receiver should operate within specification of distortion requirement according to the table below: Composite Triple Beat dB - - -58 60 channels; Measured at 543.25MHz Optical power@- 10dBm Composite Second Order distortion dB - - -58 Noise carrier rating dB 43 - - 2.5 OPTICAL PERFORMANCE SPECIFICATION See the table below: Parameter λ1 1530 1550 1570 nm Optical Wavelength Range R 0.90 0.95 - A/W Op=0dBm ， λ=1550nm Responsivity Id - 0.3 0.5 nA Dark Current IL - - 0.7 dB Insert Loss ORL - - - dB Return loss - 45 - λ=1550nm λ=1550nm Optical Connector - SC - Green Green 3. ENVIRONMENTAL SPECIFICATION 3.1 TEMPERATURE The temperature include storage temperature and operating temperature, and the optical receiver should apply to the temperature specification as the table below 3.1.1 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Unit Min Typ Max Note Optical Input Power Pin dBm - - +2.0 Levels above max range may result in (latent) damages to the machine Storage Temperature T-storage ºC -40 - +85 10 ... 95 % relative humidity; non-condensing 3.1.2 OPERATING ENVIRONMENTAL LIMITS Parameter Symbol Unit Min Typ Max Note Case Temperature T-case ºC 0 - +80 10 ... 80 % relative humidity; non-condensing Power Supply Voltage VPSU V 4.8 5.0 5.2 Power Consumption PPSU W - 0.6 1 VB=5V FTTH-F01 RF SPECIFICATIONS: Parameter Symbol Unit Min Typ Max Note RF passband FPB MHz - 75 - Minimum BW; RF output impedance Rimp_out Ω - - - AGC working range for optical input power Rimp_out dBm -15 - -5 Optical AGC will be implemented,the average optical input power controls the gain. RF output level RFout dBµV 70 72 73 Optical power input range in --5dBm~-15dBm Flatness Flatness dB - ±1 47~1000MHz Output Return Loss ORL dB - - -14 Modulation Error Ratio MER dB 33 - -  - Total 96channels input ,OMI=3.5%,Optical power@-15dBm Bit Error Ratio BER dB 1e-8 CNR CNR dB 43 60 channels; Measured at 543.25MHz Optical power@-10dBm CSO CSO dBc - - -58 CTB CTB dBc - - -58 Total current consumption(DC) Itot mA 130 - 170 VB=5V If you want to know more our product details,Please reply to get E-Catelog and FOC samples,Thank you.