SMG1022/CATV GaAs Push-pull Module

SMF8346S.PDF FEATURES ● Superior Return Loss Performance ● Extremely Low Distortion ● Excellent Linearity ● Low Noise   ● Optimal Reliability     DESCRIPTION The SMF8346S is a Push Pull amplifier module. The part employs Si dies and is operated from 40MHz to 860MHz with supply voltage +6V(DC). CHARACTERISTICS (Bandwidth 40 to 860MHZ; Tmb＝25℃, VB＝6V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 33.5 34 35 f=50MHZ SL Slope cable equivalent dB 1 2 3 f=40 to 860 MHZ FL Flatness of frequency response dB - - ±0.5 f=40 to 860 MHZ S11 Input Return Loss dB - - -16 f=40 to 860 MHZ S22 Output Return Loss dB - - -16 f=50 to 860 MHZ CTB Composite Triple Beat dB - - -50 60 channels flat; Vo=42dBmV; CSO Composite Second Order Distortion dB - - -50 CTB measured at 543.25 MHz; Xmod Cross Modulation dB - - -51 CSO measured at 544.5 MHz; Vo Output Voltage dBmV 58 - - dim=-60dB F Noise Figure dB - - 7.5 f=860 MHZ Itot Total Current Consumption mA 340 - 370 VB=+6V The module normally operates at VB=6 V(±0.5)

SMG1025.PDF FEATURES ● GaAs active devices ● Power gain @25dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1025 is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1000MHz with supply voltage +24V(DC).  CHARACTERISTICS (Bandwidth 50 to 1000MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 25 - 26.5 f=50MHZ SL Slope cable equivalent dB 0.5 1.5 2.5 f=50 to 1000 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 1000 MHZ S11＆S22 Input ＆output return loss dB - - -16 f=50 to 860 MHZ CTB Composite Triple Beat dB - - -14 f=861 to 1000 MHZ CSO Composite Second Order distortion dB - - -62 PAL 60 channel; Vo=44dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; Xmod Cross Modulation dB - - -63 Vo Output Voltage dBmV 60 - -55 F Noise Figure dB - 4.0 - f=860 MHZ Itot Total Current Consumption mA 250 330 - VB=+24V The module normally operates at VB=24 V(±0.5)

SMO815M1-SC.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standarding ● High reliability ● FC/APC SC/APC   DESCRIPTION The SMO815M1 has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 24V(DC) . The CATV GaAs Optical Receivers have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1300nm FL Flatness straight line dB - - ±0.75 f=40 to 870 MHZ Vo Output voltage dBμV - 88 - 60 channels flat; Measured at 543.25MHz; Optical power receiving at -1dbm CTB Composite triple beat dB -63 - - CSO Composite second order distortion dB -60 - - CNR Carrier to noise ratio dB -50 - - S22 Output return loss dB -10 - - f=40 to 870 MHZ Itot Total current consumption mA 100 - 130 VB=24V The module normally operates at VB=24V(±0.5) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO1228.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standard ● GaAs MMIC ● High reliability ● FC/APC SC/APC   DESCRIPTION The SMO1228 has an FC/APC or SC/APC connector. Pin Description.The amplifier supply voltage pin is connected to 24V(DC) . The CATV GaAs Optical Receivers have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 1200MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Response V/W 850 - - λ=1300nm Slope cable equivalent dB 0.5 - 1.5 f=40 to 1200 MHZ Flatness straight line dB - - ±0.75 f=40 to 1200 MHZ Output voltage dBμV - 93 - 110 channels flat; Popt= -1dBm; CTB measured at 547.25 MHz; CSO measured at 548.5 MHz; Composite triple beat dB - - -62 Composite second order distortion dB - - -63 Carrier to noise ratio dB 51 - - Output return loss dB - - -11 f=40 to 1200 MHZ Total current consumption mA 230 - 280 VB=24V The module normally operates at VB=24 V(±0.5) If you want to know about our product details，Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO3035.PDF FEATURES ● Excellent Linearit ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standard ● FC/APC SC/APC   DESCRIPTION The SMO3035 has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 3.5V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 870MHZ; T mb＝25℃, VB＝3.5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310±20nm S Responsivity V/W 950 - - λ=1550±20nm FL Flatness straight line dB - - ±0.75 f=40 to 870 MHZ Vo Output voltage dBμV - 90 - 60 channels flat; OMI=3.5% measured at 543.25 MHz; Optical power receiving at 0dBm CTB Composite triple beat dB 70 - - CSO Composite second order distortion dB 65 - - CNR Carrier to noise ratio dB 50 - - S22 Output return loss dB -11 - - f=40 to 870 MHZ Itot Total current consumption mA 70 - 100 VB=3.5V The module normally operates at VB=3.5 V(±0.5)

Applications: ● IF&Driver Amplifier ● Cellular,PCS,GSM,UMTS. ● Wireless Date,Satellite Terminals.

SMG8342M1.PDF FEATURES ●GaAs active devices ● Power gain @34dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG8342M1 is a GaAs module. The part employs GaAS dies and is operated from 50MHz to 870MHz with supply +24V( DC). CHARACTERISTICS (Bandwidth 50 to 870MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 34 - 35.5 f=50MHZ Gp Power Gain dB 37 - - f=860MHZ SL Slope cable equivalent dB 2.0 - 3.5 f=50 to 870 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 870 MHZ S11 Input Return Loss dB - - -16 f=50 to 870 MHZ S22 Output Return Loss dB - - -16 f=50 to 870 MHZ CTB Composite Triple Beat dB - - -60 PAL60 channelsflat; Vo=44dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; CSO Composite Second Order distortion dB - - -60 Xmod Cross Modulation dB - - -55 Vo Output Voltage dBmV 58 - - dim=-60dB F Noise Figure dB - - 7.5 f=860 MHZ Itot Total Current Consumption mA 100 130 - VB=+24V The module normally operates at VB=24 V(±0.5), If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Mini V-ONU F01.pdf 1. SCOPE This document describes basic electrical characteristics and mechanical characteristics of optical receiver FTTH-F01, which is produced in Shenzhen, PRC.  2. ELECTRICAL SEPCIFICATION 2.1 INPUTRANGE 2.1.1 OPTICAL INPUTRANGE Optical receiver FTTH-F01 should operate within specification of optical input range from -15dBm to -5dBm. 2.1.2 DC INPUTRANGE Optical receiver FTTH-F01 should operate within specification of DC input range from 4.8V to 5.2V.  2.2 OUTPUT LEVEL The optical receiver should operate within specification of output level from 70dBµV to 73dBµV with optical input range is from -15dBm to -5dBm.  2.3 ESD SENSITIVITY The optical receiver should operate within specification of ESD sensitivity according to the table below: ESD ESD sensitivity Human body model; R=1.5KΩ;C=100pF MAX=500 1 V 2.4 RF PERFORMANCE REQUIRMENT 2.4.1 BANDWIDTH The optical receiver should operate within specification of band width from 47MHz to 1000MHz 2.4.2 OUTPUT RETURNLOSS The exact output return loss should apply the specification that S22 ≦-14dB 2.4.3 DISTORTION REQUIREMENT The optical receiver should operate within specification of distortion requirement according to the table below: Composite Triple Beat dB - - -58 60 channels; Measured at 543.25MHz Optical power@- 10dBm Composite Second Order distortion dB - - -58 Noise carrier rating dB 43 - - 2.5 OPTICAL PERFORMANCE SPECIFICATION See the table below: Parameter λ1 1530 1550 1570 nm Optical Wavelength Range R 0.90 0.95 - A/W Op=0dBm ， λ=1550nm Responsivity Id - 0.3 0.5 nA Dark Current IL - - 0.7 dB Insert Loss ORL - - - dB Return loss - 45 - λ=1550nm λ=1550nm Optical Connector - SC - Green Green 3. ENVIRONMENTAL SPECIFICATION 3.1 TEMPERATURE The temperature include storage temperature and operating temperature, and the optical receiver should apply to the temperature specification as the table below 3.1.1 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Unit Min Typ Max Note Optical Input Power Pin dBm - - +2.0 Levels above max range may result in (latent) damages to the machine Storage Temperature T-storage ºC -40 - +85 10 ... 95 % relative humidity; non-condensing 3.1.2 OPERATING ENVIRONMENTAL LIMITS Parameter Symbol Unit Min Typ Max Note Case Temperature T-case ºC 0 - +80 10 ... 80 % relative humidity; non-condensing Power Supply Voltage VPSU V 4.8 5.0 5.2 Power Consumption PPSU W - 0.6 1 VB=5V FTTH-F01 RF SPECIFICATIONS: Parameter Symbol Unit Min Typ Max Note RF passband FPB MHz - 75 - Minimum BW; RF output impedance Rimp_out Ω - - - AGC working range for optical input power Rimp_out dBm -15 - -5 Optical AGC will be implemented,the average optical input power controls the gain. RF output level RFout dBµV 70 72 73 Optical power input range in --5dBm~-15dBm Flatness Flatness dB - ±1 47~1000MHz Output Return Loss ORL dB - - -14 Modulation Error Ratio MER dB 33 - -  - Total 96channels input ,OMI=3.5%,Optical power@-15dBm Bit Error Ratio BER dB 1e-8 CNR CNR dB 43 60 channels; Measured at 543.25MHz Optical power@-10dBm CSO CSO dBc - - -58 CTB CTB dBc - - -58 Total current consumption(DC) Itot mA 130 - 170 VB=5V If you want to know more our product details,Please reply to get E-Catelog and FOC samples,Thank you.