SD-OP101 V-ONU FTTH Optical receiver

SDU R-ONU.PDF FEATURES ● Forward reception is1200-1600nm . Reverse emission wavelength is 1310nm ● Forward receiving optical power range: -6dBm — +2 ● Forward RF bandwidth is 54MHz—1002MHz，the output level is 25 ● Light power of reverse emission is 1MW or 2 ● Reverse RF bandwidth is 5MHz-42MHz, and the input level is 25dBmv. ● On the upper surface of the shell, there are forward optical power and 1V/mW receiving optical power test points. Reverse optical power indicator and 1V/mW transmitting optical power test point ● - 20dB RF output monitoring ports in the up and dow ● Low power consumption design, especially for the whole machine ● Adopting aluminum die-casting shell. Small size and exquisite. Good heat dissipation.   DESCRIPTION The R-ONU Mini node is a small home optical node specially developed for cable TV operators for standard networking, which provides users with two-way,interactive TV and network services. Compared with other two-way optical nodes, this series of products have the characteristics of small size, flexible networking and high performance-cost ratio.

SMO-P16.PDF FEATURES ● CATV 1GHz RF frequency bandwidth. ● Integrated WDM for GPON OLT wavelength bypass (1490/1310nm). ● Automatic gain control (AGC) of RF output level. ● Compact integrated mechanical housing. ● Module design and Plug & Play function. ● DC power on indication LED. ● AC/DC 12V power adaptor(standard)   DESCRIPTION SMO-P16 Optical Receiver is a high performance 1GHz CATV optical receiver for converting TV signal from optical fiber network into RF signal over coax cabling in residential homes. This product features compact size, high CNR, low distortion, low power consumption, easy installation and cost effectiveness. It supports conventional analog TV RF as well as Digital Video Broadcasting signals. RF output level can be adjusted with manual gain control. The SMO-P16 is the best choice to be used on FTTH services. It has WDM devices integrated for combing GPON (IP) signals of wavelengths 1310nm (upstream) & 1490nm (downstream) with 1550nm CATV signal in the same fiber.

Download product specification:SMO105A-DDM.PDF FEATURES ● The Optical Input controlled in the range of - 8dBm to +2dBm ● Single +5V Supply ● Extremely low nois ● Bandwidth 1000MH ● Monitor the temperature of high precisio ● Can control the RF signal closing and opening ● FC/APC SC/APC   DESCRIPTION The SMO105A-DDM AGC Optical Receiver Module has an FC/APC or SC/APC Connector. The amplifier supply voltage pin Connect to 5V(DC) .The modules have a monomode optical input Suitable for 1300 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical Output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively V/W 850 - - λ=1300nm-1600nm FL Flatness of frequency response dB - ±0.75 - f=40 to 1000 MHZ Vo Output Voltage dBuV 79 80 81 Popt= -8 ~ +2dBm,f=550MHz, CTB Composite Triple Beat dB - - -62 Test at Optical input Power –1dBm.84 PAL-D channels DS22,OMI=3.5%per channel CSO Composite Second Order distortion dB - - -61 CNR Noise carraier rating dB - 50 - S22 Output Return Loss dB -12 - - f=40 to 1000 MHZ Itot Total Current Consumption mA 230 250 280 VB=5V The module normally operates at VB=5 V If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

SMG2302R.PDF FEATURES ● Si active devices ● Power gain @30dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG2302R is a hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 5 MHz to 200MHz with supply voltage +24V(DC).  CHARACTERISTICS (Bandwidth 5 to 200MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 29.5 - 31 f=10MHZ Gp Power Gain dB - 30.5 - f=200MHZ SL Slope cable equivalent dB -0.5 - +0.5 f=5 to 200MHZ FL Flatness of frequency response dB - - +0.5 f=5to 200MHZ S11 Input Return Loss dB - - -20 f=5 to 200MHZ S22 Output Return Loss dB - - -20 f=5 to 200MHZ CTB Composite Triple Beat dB - - -66 17channels flat; Vo=50dBmV; CSO Composite Second Order distortion dB - - -65 Xmod Cross Modulation dB - - -60 F Noise Figure dB - 4.3 - f=200 MHZ Itot Total Current Consumption mA 130 160 - VB=+24V The module normally operates at VB=24 V(±0.5) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

SMG1225DG.PDF FEATURES ● GaAs active devices ● Power gain @25dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1225DG is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1218MHz with supply voltage +24V(DC).  CHARACTERISTICS (Bandwidth 50 to 1218MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX CONDITIONS Gp Power Gain dB 24.5 25 26.5 f=50MHZ Gp Power Gain dB - 26 - f=870MHZ Gp Power Gain dB 25.5 26.5 28.5 f=1218MHZ SL Slope cable equivalent dB 0.5 1.0 2.0 f=50 to 1218 MHZ FL Flatness of frequency response dB - - 0.8 f=50 to 1218 MHZ S11＆S22 Input ＆Output Return Loss dB - - -20 f=50 to 320 MHZ S11＆S22 Input＆Output Return Loss dB - - -19 f=321 to 640 MHZ S11＆S22 Input＆Output Return Loss dB - - -17 f=641 to 870 MHZ S11＆S22 Input＆Output Return Loss dB - - -16 f=871 to 1000 MHZ S11＆S22 Input＆Output Return Loss dB - - -15 f=1001 to 1218 MHZ CTB Composite Triple Beat dB - -66 -62 Vo=48dBmV at 862MHz,flat,98 Analog channels CSO Composite Second Order distortion dB - -65 -62 Xmod Cross Modulation dB - -68 - CTB composite triple beat dB - -75 - VO=56.4dBmV at 1218MHz, 13.4dB extrapolated tilt 79 analog channels plus 75 digital channels (-6dB offset) CSO composite second order distortion dB - -79 - XMOD X modulation dB - -70 - CIN dB - -66 - F Noise Figure dB - 5.0 5.5 f=50 to 1218 MHZ Itot Total Current Consumption mA 420 440 460 VB=+24V If you want to know about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

SMG8342M1.PDF FEATURES ●GaAs active devices ● Power gain @34dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG8342M1 is a GaAs module. The part employs GaAS dies and is operated from 50MHz to 870MHz with supply +24V( DC). CHARACTERISTICS (Bandwidth 50 to 870MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 34 - 35.5 f=50MHZ Gp Power Gain dB 37 - - f=860MHZ SL Slope cable equivalent dB 2.0 - 3.5 f=50 to 870 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 870 MHZ S11 Input Return Loss dB - - -16 f=50 to 870 MHZ S22 Output Return Loss dB - - -16 f=50 to 870 MHZ CTB Composite Triple Beat dB - - -60 PAL60 channelsflat; Vo=44dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; CSO Composite Second Order distortion dB - - -60 Xmod Cross Modulation dB - - -55 Vo Output Voltage dBmV 58 - - dim=-60dB F Noise Figure dB - - 7.5 f=860 MHZ Itot Total Current Consumption mA 100 130 - VB=+24V The module normally operates at VB=24 V(±0.5), If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

SDU-RFoG-F01.PDF Product Description： The SDU RFoG F series is mainly used for RFoG network. “OBI-Free” R-ONU eliminate the Optical Beat Interferences(OBI) that has been an issue in the traditional RFoG deployments. Its return path laser can work in burst mode.The upstream output optical wavelength can be set as CWDM standard wavelength to shield the OBI effectively.   Features： 1) Support downstream optical AGC, The control range is -6~+2dBm; 2) Burst mode is supported； 3) OBI-Free technology on this model supports up to 16 R-ONUs transmitting into a single optical input; 4) 0.2nm as one step, and the automatic control of transmitting wavelength can be reached by the temperature change randomly.

Download product specification:SMO-P22.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Rugged constructio ● FC/APC ● AGC&WDM function   DESCRIPTION SMO-P22 AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry inside which make output level stably when in the range of -10~0dBm. Small size with FC connector which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively A/W 0.85 λ=1550nm FL Flatness of frequency response dB ±1.0 f=47 to 1000 MHZ VO RF Output Voltage dBmV 80 81±1 83 Optical power input range in -10dBm ~ 0dBm OMI Optical modulation Index Ch% 4.0 △S Optical return loss dB 45 Optical fiber connector Typical of optical connector ( green Color) FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 1000 MHZ, wide band flatness FL2 Flatness of frequency response dB - ±0.4 Narrow bandwidth per 7MHz SL Slope dB 0 1.5 3 From 45~1000MHz S22 Output Return Loss dB -12 - - f=45 to 870 MHZ S22 Output Return Loss dB -12 - - f=871 to 1000 MHZ Automatic Gain Control Receiving Power: -8~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 80 83 Popt= -10~0dBm BW=45~1000MHz 42 channels T=25℃ OMI=4% per channe Vo2 Output Voltage dBuV 80 83.5 Popt= -10~0dBm BW=45~1000MHz 42 channels T=0~40℃ OMI=4% per channel CTB Composite Triple Beat dB - - -60 Optical power -3dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CTB Composite Triple Beat dB - - -60 Optical power -8dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 Please note:  Vo1 are according to the optical change from -8dBm ~0dBm. For example, In -8dBm the output level is 80dBuV, but in the 0dBm maybe output level is 82dBuV.  Vo2 are according to the temperature change .for example: when the temperature stay 40℃,the output level will lower 0.5dB than 25℃. When the temperature stay 0℃,the output level will higher 0.5dB than 25℃. If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.