other
Products

MMIC-AVG1009/0.05-1.0 GHz Optical Node RF Amplifier

  • Brand:

    OEI
  • Item NO.:

    AVG1009
  • Goods Stock:

    100000
  • Payment:

    TT/LC
  • Product Origin:

    China
  • Shipping Port:

    Shenzhen
  • Lead Time:

    According to Order Quanlity
  • Weight:

    250g

AVG1009.PDF


Specification:

Brande:OEI

Part Number:MMIC-AVG1009

Product Origin:China

Lead Time:According to Order Quanlity

MOQ:>=1000

Free samples:Support

Payment:TT/LC

 

Product Features

-15dBm to -5dBm Optical Input Range.

Single +5V Suppl

29dB Gain at 55MHz34dB Gain at 1

22dB Gain Control Ran

+24dBmV/ch Output at 550

Lead-free/RoHS compliant QFN4X424L package

Product Performance (Ta=25℃)
Symbol
Parameter1
Units
Frequency
Min.
Typ.
Max.
G
Trans-Impedance
(Max. Gain State)
dB
0.05 GHz
0.87 GHz
1GHz
26.5
31.0
31.5
29.0
33.0
34.0
30.5
35.0
35.5
GT
Gain Tilt
dB


7
G Range
Gain Control Range
dB
0.05 GHz
0.87 GHz
1GHz
25.5
23.0
24.0
29.0
26.0
27.0
32.0
29.0
30.0
VAGC
AGC Control
Voltage Range
V

+3
- 0
RL
Output Return Loss
dB
0.05-1 GHz

-18

EIN2
Equivalent Input
Noise
pA/rtHz
0.05-1 GHz

3.2

IDD
Attenuator Current
mA
VDD=+5V
160 170 180
1. All measurements in a 75 Ohm system, unless otherwise specified.
2. Specified at maximum gain(VAGC=+3V).

 0.05-1.0 GHz Optical Node RF Amplifier


Related Products
catv optical module
SMG1222/CATV GaAs/GaN Push-pull Module
SMG1222.PDF FEATURES ● GaAs active devices ● Power gain @22dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1222 is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1218MHz with supply voltage +24V(DC). CHARACTERISTICS (Bandwidth 50 to 1218MHZ; Tmb=25℃, VB=24V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 22 - 23 f=50MHZ Gp Power Gain dB - 24 - f=870MHZ Gp Power Gain dB 23.5 24 24.5 f=1218MHZ SL Slope cable equivalent dB 0.5 - 2.0 f=50 to 1218 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 1218 MHZ S11&S22 Input &Output Return Loss dB - - -20 f=50 to 320 MHZ S11&S22 Input&Output Return Loss dB - - -19 f=321 to 640 MHZ S11&S22 Input&Output Return Loss dB - - -17 f=641 to 870 MHZ S11&S22 Input&Output Return Loss dB - - -16 f=871 to 1000 MHZ S11&S22 Input&Output Return Loss dB - - -15 f=1001 to 1218 MHZ CTB Composite Triple Beat dB - -68 -63 PAL99 channelsflat; Vo=46dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; CSO Composite Second Order distortion dB - -66 -61 Xmod Cross Modulation dB - -67 - Vo Output Voltage dB - - - dim=-60dB F Noise Figure dBmV - 4.5 5.0 f=50 to 1218 MHZ Itot Total Current Consumption dB 250 270 290 VB=+24V The module normally operates at VB=24 V(±0.5),  
view detail
ftth receiver,CATV module
SMO2700/CATV AGC Optical Receiver Module
Download product specification:SMO2700.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Rugged construction ● FC/APC ● AG   DESCRIPTION SMO2700 CATV AGC Optical Receiver Module is a low power, but good performance optical receiver. Output level is 70dBuV @-5dBm. Small size with FC/APC connector which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb=25℃, VB=5V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP MAX. CONDITIONS S responsively V/W 850 - - λ=1300nm-1600nm FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 1000 MHZ, wide band flatness FL2 Flatness of frequency response dB - - ±0.4 Narrow bandwidth per 7MHz SL Slope dB - 2 3 From 45~900MHz S22 Output Return Loss dB - - - f=45 to 900 MHZ S22 Output Return Loss dB - - - f=1000 to 2700 MHZ Itot Total Current Consumption mA - - 220 VB=5V Automatic Gain Control Receiving Power: -10~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 70 - - - - Popt= -5dBm BW=45~900MHz 42 channels T=25℃ OMI=4% per channel - - - - - - Vo1 Output Voltage dBuV 68 - - - - Popt= -5dBm BW=45~900MHz 42 channels T=0~40℃ OMI=4% per channel - 80.5 - - - SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS CTB Composite Triple Beat dB - - -60 Optical power -3dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -57 CTB Composite Triple Beat dB - - -57 Optical power +1dBm 42 channels PAL-D .175.25MHz OMI=4% per channel  CSO Composite Second Order distortion dB - - -56 C- spurious Carrier to spurious dB - - -56 CNR Noise carrier rating dB 45 - - Optical power -7dBm 42 channels PAL-D .175.25MHz OMI=4% per channel - - - - Please note:  Vo1 are according to the optical change from -10dBm ~0dBm. For example, In -10dBm the output level is 80dBuV, but in the 0dBm maybe output level is 82dBuV.  Vo2 are according to the temperature change .for example: when the temperature stay 40℃,the output level will lower 0.5dB than 25℃. When the temperature stay 0℃,the output level will higher 0.5dB than 25℃. If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.
view detail
optical receiver catv,ftth catv,CATV Hybrid
SMO-P26/CATV Optical Receiver Module
SMO-P26 CATV Optical Receiver Module is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.
view detail
catv hybrid amplifier
SMO-P22 AGC Optical Receiver Module
Download product specification:SMO-P22.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Rugged constructio ● FC/APC ● AGC&WDM function   DESCRIPTION SMO-P22 AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry inside which make output level stably when in the range of -10~0dBm. Small size with FC connector which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb=25℃, VB=5V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively A/W 0.85 λ=1550nm FL Flatness of frequency response dB ±1.0 f=47 to 1000 MHZ VO RF Output Voltage dBmV 80 81±1 83 Optical power input range in -10dBm ~ 0dBm OMI Optical modulation Index Ch% 4.0 △S Optical return loss dB 45 Optical fiber connector Typical of optical connector ( green Color) FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 1000 MHZ, wide band flatness FL2 Flatness of frequency response dB - ±0.4 Narrow bandwidth per 7MHz SL Slope dB 0 1.5 3 From 45~1000MHz S22 Output Return Loss dB -12 - - f=45 to 870 MHZ S22 Output Return Loss dB -12 - - f=871 to 1000 MHZ Automatic Gain Control Receiving Power: -8~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 80 83 Popt= -10~0dBm BW=45~1000MHz 42 channels T=25℃ OMI=4% per channe Vo2 Output Voltage dBuV 80 83.5 Popt= -10~0dBm BW=45~1000MHz 42 channels T=0~40℃ OMI=4% per channel CTB Composite Triple Beat dB - - -60 Optical power -3dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CTB Composite Triple Beat dB - - -60 Optical power -8dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 Please note:  Vo1 are according to the optical change from -8dBm ~0dBm. For example, In -8dBm the output level is 80dBuV, but in the 0dBm maybe output level is 82dBuV.  Vo2 are according to the temperature change .for example: when the temperature stay 40℃,the output level will lower 0.5dB than 25℃. When the temperature stay 0℃,the output level will higher 0.5dB than 25℃. If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.
view detail
catv signal amplifier module
SMG2301R/CATV Reverse Amplifier Module
SMG2301R.PDF FEATURES ● GaAs active devices ● Power gain @30dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG2301R is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 5 MHz to 200MHz with supply voltage +24V(DC).  CHARACTERISTICS (Bandwidth 5 to 200MHZ; Tmb=25℃, VB=12V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Power Gain dB 30 -31 31.5 f=10MHZ Slope cable equivalent dB -0.5 +0.5 f=5 to 200MHZ Flatness of frequency response dB ±0.3 f=5 to 200MHZ Input Return Loss dB -18 f=5 to 200MHZ Output Return Loss dB -18 f=5 to 200MHZ Composite Triple Beat dB -62 17 channels ;VO=50dBmV CTB measured at 77.25 MHz CSO measured at 78.5 MHz; Composite Second Order distortion dB -63 Cross Modulation dB -62 Noise Figure dB 4 f=200 MHZ Total Current Consumption mA 260 290 VB=+12V The module normally operates at VB=12 V(±0.5) If you want to know more our product details,please reply to get E-Catelog and FOC samples,Thank you.
view detail
low noise mmic
MMIC-SG102 mmic amplifier
Applications: ● Repeater ● RF Sub-Systems ● Base station ● Converter ● FTTH(G-PON,GE-PON) ● CATV
view detail
mini optical receiver,optical node mini
SMO33A/CATV Optical Receiver Module
Download product specification:SMO33A.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● FC/APC SC/APC ● RF-AGC   DESCRIPTION  The SMO33A CATV Optical Receiver Module has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 12V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. optical power receiving at–8~+2dBm. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb=25℃, VB=5V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310nm FL Flatness straight line dB - - ±0.6 f=40 to 870 MHZ Vo Output voltage dBμV - 79 - 60~85channels flat; Optical power receiving at –8~+2dBm CTB①/② Composite triple beat dB - - -67/- 64 60 channels flat; measured at 543.25 MHz; Optical power receiving at –8~+2dBm CSO①/② Composite second order distortion dB - - -63/- 61 CNR Carrier to noise ratio dB - 50 - S22 Output return loss dB 12 - - Optical power receiving at -1 dBm Sλ Spectral sensitivity A/W 0.85 - - f=40 to 870 MHZ A/W 0.9 - - λ=1310±20nm λ Optical wavelengh nm 1290 - 1600 Itot Total Current Consumption mA 130 - 150 VB=12V ①Optical power at -8dBm;②Optical power at +2dBm 。 The module normally operates at VB=5 V(±0.1) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.
view detail
FTTH optical module,rf power amplifier,optical node ic
SMO-P28/CATV Optical Receiver
SMO-P28 CATV Optical Receiver is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0d.
view detail

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products