other
Products

MMIC-AGC1011/0.05-1.0 GHz Optical Node RF Amplifier

  • Brand:

    OEI
  • Item NO.:

    AGC1011
  • Payment:

    TT/LC
  • Product Origin:

    China
  • Shipping Port:

    Shenzhen
  • Lead Time:

    According to Order Quanlity
  • Weight:

    30g

AGC1011.PDF


Product Features

40-1000MHz operating frequency range.

High linearity, 60dBc CTB/CSO 135 Channels @+20dBmV/ch.

41dB Gain at 55MHz41.5dB Gain at 1000MHz

High dynamic gain range, 24dB Gain Control Range, Support 12dBm optical range.

Single supply, Single +5V Sup

Low power consumption, 180mA for one RF output at 5V supply voltage.

Lead-free/RoHS compliant QFN4X424L package.

Product Performance (Ta=25℃)
Symbol
Parameter1
Units
Frequency
Min.
Typ.
Max.
G
Trans-Impedance
(Max. Gain State)
dB
0.05 GHz
0.87 GHz
1GHz
-
41.0
41.0
41.5
-
G Range
Gain Control Range
dB

-
24
-
P-1dB

dBm
0.45GHz
-
20.5
-
OIP3
Output IP3
dBm
0.45GHz
-
34
-
RL
Output Return Loss
dB
0.05-1 GHz
-
-15
-
IDD
Attenuator Current
mA
VDD=+5V
160
180 200
1. All measurements in a 75 Ohm system, unless otherwise specified.
2. Specified at maximum gain.
3. When the control voltage is changed, the attenuation is changed, Attenuation gain
deviation is ±1.5dB.

0.05-1.0 GHz Optical Node RF Amplifier



Related Products
low noise mmic
MMIC-SG102 mmic amplifier
Applications: ● Repeater ● RF Sub-Systems ● Base station ● Converter ● FTTH(G-PON,GE-PON) ● CATV
view detail
catv hybrid amplifier
SMG2242R/CATV Reverse Amplifier Module
SMG2242R.PDF FEATURES ● GaAs active devices ● Power gain @24.5dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG2242R is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 5 MHz to 200MHz with supply voltage +24V(DC).  CHARACTERISTICS (Bandwidth 5 to 200MHZ; Tmb=25℃, VB=24V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 24 - 25 f=10MHZ Gp Power Gain dB - 24.5 - f=200MHZ SL Slope cable equivalent dB - - +0.5 f=5 to 200MHZ FL Flatness of frequency response dB - - +0.5 f=5 to 200MHZ S11 Input Return Loss dB - - -20     f=5 to 200MHZ S22 Output Return Loss dB - - -20 f=5 to 200MHZ CTB Composite Triple Beat dB - - -66 17channels flat; Vo=50dBmV; CSO Composite Second Order distortion dB - - -65 Xmod Cross Modulation dB - - -60 F Noise Figure dB - 4.3 - f=200 MHZ Itot Total Current Consumption mA 130 160 - VB=+24V The module normally operates at VB=24 V(±0.5) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.
view detail
rfog technology
OBI-Free SDU R-ONU SDU-RFoG-F01
SDU-RFoG-F01.PDF Product Description: The SDU RFoG F series is mainly used for RFoG network. “OBI-Free” R-ONU eliminate the Optical Beat Interferences(OBI) that has been an issue in the traditional RFoG deployments. Its return path laser can work in burst mode.The upstream output optical wavelength can be set as CWDM standard wavelength to shield the OBI effectively.   Features: 1) Support downstream optical AGC, The control range is -6~+2dBm; 2) Burst mode is supported; 3) OBI-Free technology on this model supports up to 16 R-ONUs transmitting into a single optical input; 4) 0.2nm as one step, and the automatic control of transmitting wavelength can be reached by the temperature change randomly.
view detail
catv hybrid amplifier
SMO-P22 AGC Optical Receiver Module
Download product specification:SMO-P22.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Rugged constructio ● FC/APC ● AGC&WDM function   DESCRIPTION SMO-P22 AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry inside which make output level stably when in the range of -10~0dBm. Small size with FC connector which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb=25℃, VB=5V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively A/W 0.85 λ=1550nm FL Flatness of frequency response dB ±1.0 f=47 to 1000 MHZ VO RF Output Voltage dBmV 80 81±1 83 Optical power input range in -10dBm ~ 0dBm OMI Optical modulation Index Ch% 4.0 △S Optical return loss dB 45 Optical fiber connector Typical of optical connector ( green Color) FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 1000 MHZ, wide band flatness FL2 Flatness of frequency response dB - ±0.4 Narrow bandwidth per 7MHz SL Slope dB 0 1.5 3 From 45~1000MHz S22 Output Return Loss dB -12 - - f=45 to 870 MHZ S22 Output Return Loss dB -12 - - f=871 to 1000 MHZ Automatic Gain Control Receiving Power: -8~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 80 83 Popt= -10~0dBm BW=45~1000MHz 42 channels T=25℃ OMI=4% per channe Vo2 Output Voltage dBuV 80 83.5 Popt= -10~0dBm BW=45~1000MHz 42 channels T=0~40℃ OMI=4% per channel CTB Composite Triple Beat dB - - -60 Optical power -3dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CTB Composite Triple Beat dB - - -60 Optical power -8dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 Please note:  Vo1 are according to the optical change from -8dBm ~0dBm. For example, In -8dBm the output level is 80dBuV, but in the 0dBm maybe output level is 82dBuV.  Vo2 are according to the temperature change .for example: when the temperature stay 40℃,the output level will lower 0.5dB than 25℃. When the temperature stay 0℃,the output level will higher 0.5dB than 25℃. If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.
view detail
amplifier module
SMG1029/CATV GaAs Pull Module
SMG1029.PDF FEATURES ● GaAs active devices ● Power gain @29dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1029 is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1000MHz with supply voltage +24V(DC).  GaAs Push-pull Module CHARACTERISTICS (Bandwidth 50 to 1000MHZ; Tmb=25℃, VB=24V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 29 - 30.5 f=50MHZ SL Slope cable equivalent dB 0.5 1.5 2.5 f=50 to 1000 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 1000 MHZ S11&S22 Input &output return loss dB - - -16 f=50 to 860 MHZ Composite Triple Beat dB - - -14 f=861 to 1000 MHZ CTB Composite Second Order distortion dB - - -62 PAL 60 channel; Vo=44dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; CSO Cross Modulation dB - - -63 Xmod Output Voltage dB - - -55 Vo Noise Figure dBmV 60 - - dim=-60dB F Total Current Consumption dB - 4.0 - f=860 MHZ Itot Total Current Consumption mA 250 330 - VB=+24V The module normally operates at VB=24 V(±0.5) If you want to know more our product details,Please replay to get E-Catelog and FOC samples,Thank you.
view detail
SDU R-ONU R-ONU Mini Node
SDU R-ONU R-ONU Mini Node
SDU R-ONU.PDF FEATURES ● Forward reception is1200-1600nm . Reverse emission wavelength is 1310nm ● Forward receiving optical power range: -6dBm — +2 ● Forward RF bandwidth is 54MHz—1002MHz,the output level is 25 ● Light power of reverse emission is 1MW or 2 ● Reverse RF bandwidth is 5MHz-42MHz, and the input level is 25dBmv. ● On the upper surface of the shell, there are forward optical power and 1V/mW receiving optical power test points. Reverse optical power indicator and 1V/mW transmitting optical power test point ● - 20dB RF output monitoring ports in the up and dow ● Low power consumption design, especially for the whole machine ● Adopting aluminum die-casting shell. Small size and exquisite. Good heat dissipation.   DESCRIPTION The R-ONU Mini node is a small home optical node specially developed for cable TV operators for standard networking, which provides users with two-way,interactive TV and network services. Compared with other two-way optical nodes, this series of products have the characteristics of small size, flexible networking and high performance-cost ratio.
view detail
catv ftth optical node
SMO1205A AGC Optical Receiver Module
Download product specification :SMO1205A.PDF FEATURES ● Excellent linearity ● Extremely low noise ● Excellent flatness ● Rugged construction ● FC/APC ● AG   DESCRIPTION SMO1025A AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry make output level stably when in the range of -10~0dBm. Small size with FC/APC connector which can be assembled in a small case.  
view detail
high power mmic amplifier
MMIC-SG106 mmic amplifier
Applications: ● Low Noise Amplifier for CATV, Satellite ● Cable Modem ● FTTH(G-PON,GE-PON) ● Optical node
view detail

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products