2 results found for "ftth catv optical receiver"
  • bets tv signal amplifier
    bets tv signal amplifier
    SMO1025/CATV GaAs Optical Receivers
    SMO1025.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standarding ● GaAs MMIC ● High reliability ● FC/APC SC/APC   DESCRIPTION The SMO1025 has an FC/APC or SC/APC connector. Pin Description The amplifier supply voltage pin is connected to 24V(DC) . The CATV GaAs Optical Receivers have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 1005MHZ; Tmb=25℃, VB=24V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Responsivity V/W 850 - - λ=1300nm Flatness straight line dB - - ±0.75 f=40 to 1005 MHZ Output voltage dBμV - 88 - 110 channels flat; Popt= - 1dBm; CTB measured at 745.25 MHz; CSO measured at 746.5 MHz; Composite triple beat dB - -65 - Composite second order distortion dB - -63 - Carrier to noise ratio dB - -51 - Output return loss dB - -11 - f=40 to 1005 MHZ Total current consumption mA 240 - 290 VB=24V The module normally operates at VB=24 V(±0.5)
  • FTTH optical receiver
    FTTH optical receiver
    SD-OP101 V-ONU FTTH Optical receiver
    SD-OP101 V-ONU.PDF Description: The SD-OP101 V-ONU is a video optical receiver (V-ONU) for FTTH installed in the subscriber's home with a CATV system. It has the following features. (1) Optical receiver for video with a frequency band of 70 to 2681 MHz (8) Equipped with a new AGC function (2) BS (right-handed / left-handed), CS (right-handed) receivable Optical input range -14 to -4 dBm, RF output within ± 3 dB ③ With remote control function (band-specific control function) ④ Equipped with a tilt function to correct cable loss (CATV band approx. 6 dB) ⑤ The V-ONU main unit has a low current consumption of 180mA. ⑥ Power supply comes with coaxial power supply and coaxial superimposition power supply (built-in power inserter) ⑦ With an optical fiber extra length processing function, a fiber tray that can store two connection sleeves and one WDM filter.

A total of 1 pages

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.